DXF 150C LiPo Battery – 6S 22.2V 1050mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

Ultimate 6S 22.2V High-Punch Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding explosive throttle response at the highest voltage, this 1050mAh 6S LiPo delivers an incredible 150C discharge rate at 22.2V. At just 190g including wire and connector, the compact 82×38×33mm form factor fits a wide range of 6S micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 22.2V / 6-Cell / 6S1P
• Discharge Rate: 150C
• Charge Rate: 1C Max
• 1050mAh Capacity: Optimized for 6S micro and whoop builds
• Dimensions: 82 × 38 × 33 mm
• Weight: 190g (including wire and connector)

Perfect For:

FPV whoop drones, 6S micro racing quads, and high-performance indoor/outdoor FPV builds requiring maximum 6S punch. Compatible with virtually any 6S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 6S whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 150C LiPo Battery – 4S 14.8V 1050mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

High-Punch 4S 14.8V Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding explosive throttle response with 4S performance, this 1050mAh 4S LiPo delivers an incredible 150C discharge rate at 14.8V. At just 134g including wire and connector, the compact 81×38×23mm form factor fits a wide range of 4S micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 14.8V / 4-Cell / 4S1P
• Discharge Rate: 150C
• Charge Rate: 1C Max
• 1050mAh Capacity: Optimized for 4S micro and whoop builds
• Dimensions: 81 × 38 × 23 mm
• Weight: 134g (including wire and connector)

Perfect For:

FPV whoop drones, 4S micro racing quads, and high-performance indoor/outdoor FPV builds requiring high-punch 4S power. Compatible with virtually any 4S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 4S whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 150C LiPo Battery – 2S 7.4V 1050mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

High-Punch 2S 7.4V Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding explosive throttle response with 2S performance, this 1050mAh 2S LiPo delivers an incredible 150C discharge rate at 7.4V. At just 92g including wire and connector, the compact 81×38×12mm form factor fits a wide range of 2S micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 7.4V / 2-Cell / 2S1P
• Discharge Rate: 150C
• Charge Rate: 1C Max
• 1050mAh Capacity: Optimized for 2S micro and whoop builds
• Dimensions: 81 × 38 × 12 mm
• Weight: 92g (including wire and connector)

Perfect For:

FPV whoop drones, 2S micro racing quads, and lightweight indoor/outdoor FPV builds requiring high-punch 2S power. Compatible with virtually any 2S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 2S whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 150C LiPo Battery – 5S 18.5V 1050mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

High-Punch 5S 18.5V Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding explosive throttle response with 5S performance, this 1050mAh 5S LiPo delivers an incredible 150C discharge rate at 18.5V. At just 162g including wire and connector, the compact 82×38×28mm form factor fits a wide range of 5S micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 18.5V / 5-Cell / 5S1P
• Discharge Rate: 150C
• Charge Rate: 1C Max
• 1050mAh Capacity: Optimized for 5S micro and whoop builds
• Dimensions: 82 × 38 × 28 mm
• Weight: 162g (including wire and connector)

Perfect For:

FPV whoop drones, 5S micro racing quads, and high-performance indoor/outdoor FPV builds requiring high-punch 5S power. Compatible with virtually any 5S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 5S whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 150C LiPo Battery – 3S 11.1V 1050mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

High-Punch 3S 11.1V Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding explosive throttle response with 3S performance, this 1050mAh 3S LiPo delivers an incredible 150C discharge rate at 11.1V. At just 118g including wire and connector, the compact 81×38×17mm form factor fits a wide range of 3S micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 11.1V / 3-Cell / 3S1P
• Discharge Rate: 150C
• Charge Rate: 1C Max
• 1050mAh Capacity: Optimized for 3S micro and whoop builds
• Dimensions: 81 × 38 × 17 mm
• Weight: 118g (including wire and connector)

Perfect For:

FPV whoop drones, 3S micro racing quads, and high-performance indoor/outdoor FPV builds requiring high-punch 3S power. Compatible with virtually any 3S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 3S whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.