DXF 90C LiPo Battery – 4S 15.2V 380mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

High-Punch 4S 15.2V Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding explosive throttle response with 4S performance, this 380mAh 4S LiPo delivers a 90C discharge rate at 15.2V. At just 43g including wire and connector, the compact 54×17×27mm form factor fits a wide range of 4S micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate
• ⚡ Fast Charge Capable — supports up to 2C charge rate on compatible chargers
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 15.2V / 4-Cell / 4S1P
• Discharge Rate: 90C
• Charge Rate: 1C Max (up to 2C fast charge capable)
• 380mAh Capacity: Optimized for 4S micro and whoop builds
• Dimensions: 54 × 17 × 27 mm
• Weight: 43g (including wire and connector)

Perfect For:

FPV whoop drones, 4S micro racing quads, and high-performance indoor/outdoor FPV builds requiring high-punch 4S power. Compatible with virtually any 4S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 4S whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 90C LiPo Battery – 3S 11.4V 380mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

High-Punch 3S 11.4V Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding explosive throttle response with 3S performance, this 380mAh 3S LiPo delivers a 90C discharge rate at 11.4V. At just 32g including wire and connector, the compact 55×17×20mm form factor fits a wide range of 3S micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate
• ⚡ Fast Charge Capable — supports up to 2C charge rate on compatible chargers
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 11.4V / 3-Cell / 3S1P
• Discharge Rate: 90C
• Charge Rate: 1C Max (up to 2C fast charge capable)
• 380mAh Capacity: Optimized for 3S micro and whoop builds
• Dimensions: 55 × 17 × 20 mm
• Weight: 32g (including wire and connector)

Perfect For:

FPV whoop drones, 3S micro racing quads, and high-performance indoor/outdoor FPV builds requiring high-punch 3S power. Compatible with virtually any 3S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 3S whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 90C LiPo Battery – 2S 7.6V 380mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

High-Punch 2S 7.6V Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding explosive throttle response with 2S performance, this 380mAh 2S LiPo delivers a 90C discharge rate at 7.6V. At just 22g including wire and connector, the compact 52×17×13mm form factor fits a wide range of 2S micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate
• ⚡ Fast Charge Capable — supports up to 2C charge rate on compatible chargers
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 7.6V / 2-Cell / 2S1P
• Discharge Rate: 90C
• Charge Rate: 1C Max (up to 2C fast charge capable)
• 380mAh Capacity: Optimized for 2S micro and whoop builds
• Dimensions: 52 × 17 × 13 mm
• Weight: 22g (including wire and connector)

Perfect For:

FPV whoop drones, 2S micro racing quads, and lightweight indoor/outdoor FPV builds requiring high-punch 2S power. Compatible with virtually any 2S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 2S whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 90C LiPo Battery – 1S 3.8V 380mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

Ultra-Lightweight 1S 3.8V High-Punch Power for FPV Whoop & Micro Racing

Engineered for the lightest FPV whoop and micro racing drones demanding maximum punch from a single-cell pack, this 380mAh 1S LiPo delivers a 90C discharge rate at 3.8V. At just 10g including wire and connector, the ultra-slim 50×17×6.7mm form factor is purpose-built for 1S micro and whoop frames where every gram counts.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate
• ⚡ Fast Charge Capable — supports up to 2C charge rate on compatible chargers
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 3.8V / 1-Cell / 1S1P
• Discharge Rate: 90C
• Charge Rate: 1C Max (up to 2C fast charge capable)
• 380mAh Capacity: Optimized for ultra-light 1S micro and whoop builds
• Dimensions: 50 × 17 × 6.7 mm
• Weight: 10g (including wire and connector)

Perfect For:

1S FPV whoop drones, ultra-light micro racing quads, and indoor FPV builds requiring maximum punch from a single-cell pack. Compatible with virtually any 1S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 1S whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.