DXF 110C LiPo Battery – 6S 22.2V 2200mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

Ultimate 6S 22.2V Ultra-High Discharge Long-Pack Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding the ultimate combination of maximum capacity and extreme burst power, this 2200mAh 6S LiPo delivers an exceptional 110C discharge rate at 22.2V — the most powerful pack in the DXF 2200mAh lineup. At 341g including wire and connector, the long-pack 110×34×48mm form factor delivers over 6x the capacity of standard 350mAh packs while fitting a wide range of 6S micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate, delivering power when you need it most
• ⚡ Fast Charge Capable — supports up to 5C charge rate on compatible chargers, getting you back in the air faster
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology, protecting your investment over time
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee for peace of mind

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 22.2V / 6-Cell / 6S1P
• Discharge Rate: 110C
• Charge Rate: 1C Max (up to 5C fast charge capable)
• 2200mAh Capacity: Maximum flight times for 6S whoop and micro builds
• Dimensions: 110 × 34 × 48 mm
• Weight: 341g (including wire and connector)

Perfect For:

FPV whoop drones, 6S micro racing quads, and long-endurance indoor/outdoor FPV builds requiring maximum 6S capacity with extreme burst power. Compatible with virtually any 6S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 6S long-endurance fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 110C LiPo Battery – 5S 18.5V 2200mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

Ultra-High Discharge 5S 18.5V Long-Pack Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding maximum capacity combined with extreme burst power at the highest 5S voltage, this 2200mAh 5S LiPo delivers an exceptional 110C discharge rate at 18.5V. At 284g including wire and connector, the long-pack 106×34×40mm form factor delivers over 6x the capacity of standard 350mAh packs while fitting a wide range of 5S micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate, delivering power when you need it most
• ⚡ Fast Charge Capable — supports up to 5C charge rate on compatible chargers, getting you back in the air faster
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology, protecting your investment over time
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee for peace of mind

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 18.5V / 5-Cell / 5S1P
• Discharge Rate: 110C
• Charge Rate: 1C Max (up to 5C fast charge capable)
• 2200mAh Capacity: Maximum flight times for 5S whoop and micro builds
• Dimensions: 106 × 34 × 40 mm
• Weight: 284g (including wire and connector)

Perfect For:

FPV whoop drones, 5S micro racing quads, and long-endurance indoor/outdoor FPV builds requiring maximum 5S capacity with extreme burst power. Compatible with virtually any 5S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 5S long-endurance fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 110C LiPo Battery – 4S 14.8V 2200mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

Ultra-High Discharge 4S 14.8V Long-Pack Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding maximum capacity combined with extreme burst power, this 2200mAh 4S LiPo delivers an exceptional 110C discharge rate at 14.8V. At 231g including wire and connector, the long-pack 106×34×32mm form factor delivers over 6x the capacity of standard 350mAh packs while fitting a wide range of 4S micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate, delivering power when you need it most
• ⚡ Fast Charge Capable — supports up to 5C charge rate on compatible chargers, getting you back in the air faster
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology, protecting your investment over time
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee for peace of mind

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 14.8V / 4-Cell / 4S1P
• Discharge Rate: 110C
• Charge Rate: 1C Max (up to 5C fast charge capable)
• 2200mAh Capacity: Maximum flight times for 4S whoop and micro builds
• Dimensions: 106 × 34 × 32 mm
• Weight: 231g (including wire and connector)

Perfect For:

FPV whoop drones, 4S micro racing quads, and long-endurance indoor/outdoor FPV builds requiring maximum 4S capacity with extreme burst power. Compatible with virtually any 4S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 4S long-endurance fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 110C LiPo Battery – 3S 11.1V 2200mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

Ultra-High Discharge 3S 11.1V Long-Pack Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding maximum capacity combined with extreme burst power, this 2200mAh 3S LiPo delivers an exceptional 110C discharge rate at 11.1V. At 178g including wire and connector, the long-pack 106×34×24mm form factor delivers over 6x the capacity of standard 350mAh packs while fitting a wide range of 3S micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate, delivering power when you need it most
• ⚡ Fast Charge Capable — supports up to 5C charge rate on compatible chargers, getting you back in the air faster
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology, protecting your investment over time
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee for peace of mind

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 11.1V / 3-Cell / 3S1P
• Discharge Rate: 110C
• Charge Rate: 1C Max (up to 5C fast charge capable)
• 2200mAh Capacity: Maximum flight times for 3S whoop and micro builds
• Dimensions: 106 × 34 × 24 mm
• Weight: 178g (including wire and connector)

Perfect For:

FPV whoop drones, 3S micro racing quads, and long-endurance indoor/outdoor FPV builds requiring maximum 3S capacity with extreme burst power. Compatible with virtually any 3S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 3S long-endurance fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 110C LiPo Battery – 2S 7.4V 2200mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

Ultra-High Discharge 2S 7.4V Long-Pack Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding maximum capacity combined with extreme burst power, this 2200mAh 2S LiPo delivers an exceptional 110C discharge rate at 7.4V. At 138g including wire and connector, the long-pack 106×34×16mm form factor delivers over 6x the capacity of standard 350mAh packs while maintaining a slim, frame-friendly profile for 2S micro and whoop builds.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate, delivering power when you need it most
• ⚡ Fast Charge Capable — supports up to 5C charge rate on compatible chargers, getting you back in the air faster
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology, protecting your investment over time
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee for peace of mind

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 7.4V / 2-Cell / 2S1P
• Discharge Rate: 110C
• Charge Rate: 1C Max (up to 5C fast charge capable)
• 2200mAh Capacity: Maximum flight times for 2S whoop and micro builds
• Dimensions: 106 × 34 × 16 mm
• Weight: 138g (including wire and connector)

Perfect For:

FPV whoop drones, 2S micro racing quads, and long-endurance indoor/outdoor FPV builds requiring maximum 2S capacity with extreme burst power. Compatible with virtually any 2S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 2S long-endurance fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.