DXF 140C Graphene LiPo Battery – 4S HV 15.2V 6500mAh Gold Version

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

140C High-Discharge Performance – 4S HV Gold Version

Engineered for high-power RC racing, this 6500mAh 4S HV graphene LiPo delivers a powerful 140C discharge rate at 15.2V high voltage. The 4S1P configuration provides the high voltage output demanded by 1/8 and 1/5 scale vehicles, brushless systems, and competition-grade ESCs. Gold-plated terminals deliver maximum conductivity with minimal resistance under race conditions. Advanced graphene cell technology ensures consistent power delivery, rapid heat dissipation, and exceptional cycle life.

4S HV Gold – High Voltage for Large-Scale RC

The 4S HV (4 series) cell arrangement delivers 15.2V nominal voltage with 6500mAh capacity — providing the high-voltage punch required by 1/8 buggies, truggies, GT cars, and 1/5 scale platforms.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 140C Discharge Rate: Race-grade power delivery for competitive RC racing
• 6500mAh Capacity: High capacity for extended run times
• 4S HV Configuration (4S1P): 15.2V high-voltage nominal — ideal for high-power brushless systems
• Gold Version: Gold-plated terminals for superior conductivity and minimal resistance
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 148 × 48 × 36 mm
• Weight: 479g per battery

Perfect For:

Compatible with a wide range of large-scale RC vehicles, including 1/8 buggies, 1/8 truggies, 1/8 GT cars, 1/8 on-road, 1/5 scale cars, and more. Ideal for club racing and competitive events where high-voltage 4S performance is required.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back qualifying sessions.

Select your quantity and connector type above to get the perfect setup for your RC vehicle.

DXF 150C Graphene LiPo Battery – 4S HV 15.2V 6500mAh NGP Gold Version

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

150C Competition-Grade Performance – 4S HV NGP Gold Version

Engineered for high-power RC racing, this 6500mAh 4S HV graphene LiPo delivers a blistering 150C discharge rate at 15.2V high voltage. The 4S1P configuration provides the high voltage output demanded by 1/8 and 1/5 scale vehicles, brushless systems, and competition-grade ESCs. The NGP Gold form factor ensures a precise chassis fit, and gold-plated terminals deliver maximum conductivity with minimal resistance under race conditions. Advanced graphene cell technology ensures consistent power delivery, rapid heat dissipation, and exceptional cycle life.

4S HV NGP Gold – High Voltage for Large-Scale RC

The 4S HV (4 series) cell arrangement delivers 15.2V nominal voltage with 6500mAh capacity — providing the high-voltage punch required by 1/8 buggies, truggies, GT cars, and 1/5 scale platforms. The NGP Gold form factor suits a wide range of large-scale chassis.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 150C Discharge Rate: Competition-grade power delivery for serious racing
• 6500mAh Capacity: High capacity for extended run times
• 4S HV Configuration (4S1P): 15.2V high-voltage nominal — ideal for high-power brushless systems
• NGP Gold Version: Gold-plated terminals for superior conductivity and minimal resistance
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 148 × 48 × 36 mm
• Weight: 479g per battery

Perfect For:

Compatible with a wide range of large-scale RC vehicles, including 1/8 buggies, 1/8 truggies, 1/8 GT cars, 1/8 on-road, 1/5 scale cars, and more. Ideal for club racing and competitive events where high-voltage 4S performance is required.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back qualifying sessions.

Select your quantity and connector type above to get the perfect setup for your RC vehicle.

DXF 150C Graphene LiPo Battery – 2S2P HV 7.6V 7500mAh NGP Plus Gold Version

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

150C Competition-Grade Performance – 2S2P HV NGP Plus Gold Version

Engineered for serious competitive RC racing across multiple scales, this 7500mAh 2S2P HV graphene LiPo delivers a blistering 150C discharge rate at 7.6V high voltage. The mid-size form factor (115mm length) bridges the gap between compact and full-size packs, making it ideal for a wider range of chassis and vehicle classes. The 2S2P configuration doubles the cell count for significantly higher capacity and sustained current output, while the HV chemistry provides a performance advantage over standard 7.4V packs. The NGP Plus design ensures a precise chassis fit, and gold-plated terminals deliver maximum conductivity with minimal resistance under race conditions.

Mid-Size NGP Plus Gold – Versatile Across RC Classes

The 115mm length makes this pack compatible with a broader range of RC vehicle classes than standard short-pack designs — from 1/10 touring cars and buggies to 1/8 and 1/5 scale platforms. One pack, multiple applications.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 150C Discharge Rate: Competition-grade power delivery for serious racing
• 7500mAh Capacity: Maximum capacity for extended run times
• 2S2P HV Configuration: 7.6V high-voltage nominal, parallel cells for maximum capacity
• NGP Plus Gold Version: Mid-size form factor with gold-plated terminals for superior conductivity
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 115 × 48 × 25 mm
• Weight: 263g per battery

Perfect For:

Compatible with a wide range of RC scale vehicles, including 1/10 touring cars, 1/10 buggies, 1/10 stadium trucks, 1/8 buggies, 1/8 truggies, 1/8 GT cars, 1/8 on-road, 1/5 scale cars, and more. Ideal for club racing, EFRA, IFMAR, and competitive events across multiple RC classes. The mid-size 115mm length gives you more chassis compatibility than standard short packs.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back qualifying sessions.

Select your quantity and connector type above to get the perfect setup for your RC vehicle.

DXF 150C Graphene LiPo Battery Gray – 2S2P HV 7.6V 7500mAh

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

150C High-Discharge Performance – 2S2P HV Gray Edition

Powered by advanced graphene technology, this 7500mAh 2S2P HV graphene LiPo delivers a blistering 150C discharge rate at 7.6V high voltage. The mid-size form factor (115mm length) bridges the gap between compact and full-size packs, making it ideal for a wider range of chassis and vehicle classes. The 2S2P configuration doubles the cell count for significantly higher capacity and sustained current output, while the HV chemistry provides a performance advantage over standard 7.4V packs. The clean gray casing gives a sleek, understated look on the track.

Mid-Size Gray – Versatile Across RC Classes

The 115mm length makes this pack compatible with a broader range of RC vehicle classes than standard short-pack designs — from 1/10 touring cars and buggies to 1/8 and 1/5 scale platforms. One pack, multiple applications.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 150C Discharge Rate: Competition-grade power delivery for serious racing
• 7500mAh Capacity: Maximum capacity for extended run times
• 2S2P HV Configuration: 7.6V high-voltage nominal, parallel cells for maximum capacity
• Gray Edition: Clean, sleek gray casing
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 115 × 48 × 25 mm
• Weight: 263g per battery

Perfect For:

Compatible with a wide range of RC scale vehicles, including 1/10 touring cars, 1/10 buggies, 1/10 stadium trucks, 1/8 buggies, 1/8 truggies, 1/8 GT cars, 1/8 on-road, 1/5 scale cars, and more. Ideal for club racing and competitive events across multiple RC classes. The mid-size 115mm length gives you more chassis compatibility than standard short packs.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your RC vehicle.

DXF 150C Graphene LiPo Battery Gray – 2S2P HV 7.6V 7000mAh

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

150C High-Discharge Performance – 2S2P HV Gray Edition

Powered by advanced graphene technology, this 7000mAh 2S2P HV graphene LiPo delivers a blistering 150C discharge rate at 7.6V high voltage. The mid-size form factor (113mm length) bridges the gap between compact and full-size packs, making it ideal for a wider range of chassis and vehicle classes. The 2S2P configuration doubles the cell count for significantly higher capacity and sustained current output, while the HV chemistry provides a performance advantage over standard 7.4V packs. The clean gray casing gives a sleek, understated look on the track.

Mid-Size Gray – Versatile Across RC Classes

The 113mm length makes this pack compatible with a broader range of RC vehicle classes than standard short-pack designs — from 1/10 touring cars and buggies to 1/8 and 1/5 scale platforms. One pack, multiple applications.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 150C Discharge Rate: Competition-grade power delivery for serious racing
• 7000mAh Capacity: Maximum capacity for extended run times
• 2S2P HV Configuration: 7.6V high-voltage nominal, parallel cells for maximum capacity
• Gray Edition: Clean, sleek gray casing
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 113 × 48 × 25 mm
• Weight: 263g per battery

Perfect For:

Compatible with a wide range of RC scale vehicles, including 1/10 touring cars, 1/10 buggies, 1/10 stadium trucks, 1/8 buggies, 1/8 truggies, 1/8 GT cars, 1/8 on-road, 1/5 scale cars, and more. Ideal for club racing and competitive events across multiple RC classes. The mid-size 113mm length gives you more chassis compatibility than standard short packs.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your RC vehicle.

DXF 150C Graphene LiPo Battery – 2S2P HV 7.6V 7000mAh NGP Plus Gold Version

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

150C Competition-Grade Performance – 2S2P HV NGP Plus Gold Version

Engineered for serious competitive RC racing across multiple scales, this 7000mAh 2S2P HV graphene LiPo delivers a blistering 150C discharge rate at 7.6V high voltage. The mid-size form factor (113mm length) bridges the gap between compact and full-size packs, making it ideal for a wider range of chassis and vehicle classes. The 2S2P configuration doubles the cell count for significantly higher capacity and sustained current output, while the HV chemistry provides a performance advantage over standard 7.4V packs. The NGP Plus design ensures a precise chassis fit, and gold-plated terminals deliver maximum conductivity with minimal resistance under race conditions.

Mid-Size NGP Plus Gold – Versatile Across RC Classes

The 113mm length makes this pack compatible with a broader range of RC vehicle classes than standard short-pack designs — from 1/10 touring cars and buggies to 1/8 and 1/5 scale platforms. One pack, multiple applications.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 150C Discharge Rate: Competition-grade power delivery for serious racing
• 7000mAh Capacity: Maximum capacity for extended run times
• 2S2P HV Configuration: 7.6V high-voltage nominal, parallel cells for maximum capacity
• NGP Plus Gold Version: Mid-size form factor with gold-plated terminals for superior conductivity
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 113 × 48 × 25 mm
• Weight: 263g per battery

Perfect For:

Compatible with a wide range of RC scale vehicles, including 1/10 touring cars, 1/10 buggies, 1/10 stadium trucks, 1/8 buggies, 1/8 truggies, 1/8 GT cars, 1/8 on-road, 1/5 scale cars, and more. Ideal for club racing, EFRA, IFMAR, and competitive events across multiple RC classes. The mid-size 113mm length gives you more chassis compatibility than standard short packs.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back qualifying sessions.

Select your quantity and connector type above to get the perfect setup for your RC vehicle.

DXF 140C Graphene LiPo Battery Gray – 2S2P HV 7.6V 7000mAh

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

140C High-Discharge Performance – 2S2P HV Gray Edition

Powered by advanced graphene technology, this 7000mAh 2S2P HV graphene LiPo delivers a powerful 140C discharge rate at 7.6V high voltage. The 2S2P configuration doubles the cell count for significantly higher capacity and sustained current output, while the HV chemistry provides a performance advantage over standard 7.4V packs. The clean gray casing gives a sleek, understated look on the track. Advanced graphene cell technology ensures consistent power delivery, rapid heat dissipation, and exceptional cycle life.

2S2P HV Configuration – Maximum Capacity at High Voltage

The 2S2P (2 series, 2 parallel) HV cell arrangement delivers 7.6V nominal voltage with 7000mAh capacity — combining the speed advantage of HV chemistry with the extended run time of a parallel cell configuration.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 140C Discharge Rate: Race-grade power delivery for competitive RC racing
• 7000mAh Capacity: Maximum capacity for extended run times
• 2S2P HV Configuration: 7.6V high-voltage nominal, parallel cells for maximum capacity
• Gray Edition: Clean, sleek gray casing
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 96 × 48 × 25 mm
• Weight: 222g per battery

Perfect For:

Compatible with a wide range of RC scale vehicles, including 1/10 touring cars, 1/10 buggies, 1/10 stadium trucks, 1/8 buggies, 1/8 truggies, 1/8 GT cars, and more. Ideal for club racing and competitive events across multiple RC classes.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your RC vehicle.

DXF 140C Graphene LiPo Battery – 2S2P HV 7.6V 7000mAh NGP Plus Gold Version

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

140C Race-Grade Performance – 2S2P HV NGP Plus Gold Version

Engineered for serious competitive RC racing across multiple scales, this 7000mAh 2S2P HV graphene LiPo delivers a powerful 140C discharge rate at 7.6V high voltage. The 2S2P configuration doubles the cell count for significantly higher capacity and sustained current output, while the HV chemistry provides a performance advantage over standard 7.4V packs. The NGP Plus form factor is purpose-built for 1/10 touring car chassis with precise dimensions for a perfect fit. Gold-plated terminals ensure maximum conductivity and minimal resistance under race conditions.

2S2P HV NGP Plus Gold – Maximum Capacity at High Voltage

The 2S2P (2 series, 2 parallel) HV cell arrangement delivers 7.6V nominal voltage with 7000mAh capacity — combining the speed advantage of HV chemistry with the extended run time of a parallel cell configuration, in a championship-ready NGP Plus Gold package.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 140C Discharge Rate: Race-grade power delivery for competitive RC racing
• 7000mAh Capacity: Maximum capacity for extended run times
• 2S2P HV Configuration: 7.6V high-voltage nominal, parallel cells for maximum capacity
• NGP Plus Gold Version: Purpose-built form factor with gold-plated terminals for superior conductivity
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 96 × 48 × 25 mm
• Weight: 222g per battery

Perfect For:

Compatible with a wide range of RC scale vehicles, including 1/10 touring cars, 1/10 buggies, 1/10 stadium trucks, 1/8 buggies, 1/8 truggies, 1/8 GT cars, and more. Ideal for club racing, EFRA, IFMAR, and competitive events across multiple RC classes.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back qualifying sessions.

Select your quantity and connector type above to get the perfect setup for your RC vehicle.

DXF 130C Graphene LiPo Battery Gray – 2S2P HV 7.6V 6300mAh

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

130C High-Discharge Performance – 2S2P HV Gray Edition

Powered by advanced graphene technology, this 6300mAh 2S2P HV graphene LiPo delivers a powerful 130C discharge rate at 7.6V high voltage. The 2S2P configuration doubles the cell count for significantly higher capacity and sustained current output, while the HV chemistry provides a performance advantage over standard 7.4V packs. The clean gray casing gives a sleek, understated look on the track. Advanced graphene cell technology ensures consistent power delivery, rapid heat dissipation, and exceptional cycle life.

2S2P HV Configuration – High Capacity at High Voltage

The 2S2P (2 series, 2 parallel) HV cell arrangement delivers 7.6V nominal voltage with 6300mAh capacity — combining the speed advantage of HV chemistry with the extended run time of a parallel cell configuration.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 130C Discharge Rate: High-power delivery for demanding RC applications
• 6300mAh Capacity: High capacity for extended run times
• 2S2P HV Configuration: 7.6V high-voltage nominal, parallel cells for maximum capacity
• Gray Edition: Clean, sleek gray casing
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 96 × 48 × 25 mm
• Weight: 212g per battery

Perfect For:

Compatible with a wide range of RC scale vehicles, including 1/10 touring cars, 1/10 buggies, 1/10 stadium trucks, 1/8 buggies, 1/8 truggies, 1/8 GT cars, and more. Ideal for club racing and competitive events across multiple RC classes.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your RC vehicle.

DXF 130C Graphene LiPo Battery – 2S2P HV 7.6V 6300mAh NGP Plus Gold Version

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

130C Race-Grade Performance – 2S2P HV NGP Plus Gold Version

Engineered for serious competitive RC racing across multiple scales, this 6300mAh 2S2P HV graphene LiPo delivers a powerful 130C discharge rate at 7.6V high voltage. The 2S2P configuration doubles the cell count for significantly higher capacity and sustained current output, while the HV chemistry provides a performance advantage over standard 7.4V packs. The NGP Plus form factor is purpose-built for 1/10 touring car chassis with precise dimensions for a perfect fit. Gold-plated terminals ensure maximum conductivity and minimal resistance under race conditions.

2S2P HV NGP Plus Gold – High Capacity at High Voltage

The 2S2P (2 series, 2 parallel) HV cell arrangement delivers 7.6V nominal voltage with 6300mAh capacity — combining the speed advantage of HV chemistry with the extended run time of a parallel cell configuration, in a championship-ready NGP Plus Gold package.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 130C Discharge Rate: High-power delivery for demanding RC racing applications
• 6300mAh Capacity: High capacity for extended run times
• 2S2P HV Configuration: 7.6V high-voltage nominal, parallel cells for maximum capacity
• NGP Plus Gold Version: Purpose-built form factor with gold-plated terminals for superior conductivity
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 96 × 48 × 25 mm
• Weight: 212g per battery

Perfect For:

Compatible with a wide range of RC scale vehicles, including 1/10 touring cars, 1/10 buggies, 1/10 stadium trucks, 1/8 buggies, 1/8 truggies, 1/8 GT cars, and more. Ideal for club racing, EFRA, IFMAR, and competitive events across multiple RC classes.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back qualifying sessions.

Select your quantity and connector type above to get the perfect setup for your RC vehicle.

DXF 150C Graphene LiPo Battery Gold – 2S 7.4V 5500mAh NGP Plus Version

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

150C Race-Grade Performance – 2S Gold NGP Plus Version

Engineered for serious competitive 1/10 touring car racing, this 5500mAh 2S graphene LiPo delivers a blistering 150C discharge rate at 7.4V. Higher capacity than standard 4400mAh packs means longer run times without sacrificing power. The NGP Plus form factor is purpose-built for 1/10 touring car chassis, with precise dimensions for a perfect fit. Gold-plated terminals ensure maximum conductivity and minimal resistance under race conditions. Advanced graphene cell technology delivers consistent power, rapid heat dissipation, and exceptional cycle life.

NGP Plus Gold – Built for Championship-Level Competition

The NGP Plus design meets the dimensional requirements of major touring car racing classes. Precise dimensions ensure a perfect fit in standard NGP Plus-compatible chassis without modification — ready to race straight out of the box.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 150C Discharge Rate: Competition-grade power delivery for serious racing
• 5500mAh Capacity: Higher capacity for extended race run times
• 2S Configuration (2S1P): 7.4V nominal — standard touring car voltage
• Gold Edition: Premium gold-plated terminals for superior conductivity
• NGP Plus Version: Purpose-built form factor for 1/10 touring car competition chassis
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 96 × 48 × 22.5 mm
• Weight: 195g per battery

Perfect For:

RC 1/10 touring car racing, including EFRA, IFMAR, and club-level competition. Ideal for drivers who demand maximum discharge rate, higher capacity, and a perfect NGP Plus chassis fit.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back qualifying sessions.

Select your quantity and connector type above to get the perfect setup for your touring car.

DXF 150C Graphene LiPo Battery Gray – 2S 7.4V 5500mAh

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

150C High-Discharge Performance – 2S Gray Edition

Powered by advanced graphene technology, this 5500mAh 2S graphene LiPo delivers a blistering 150C discharge rate at 7.4V. Higher capacity than standard 4400mAh packs means longer run times without sacrificing power. The clean gray casing gives a sleek, understated look on the track. Advanced graphene cell technology ensures consistent power delivery, rapid heat dissipation, and exceptional cycle life.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 150C Discharge Rate: Competition-grade power delivery for serious racing
• 5500mAh Capacity: Higher capacity for extended race run times
• 2S Configuration (2S1P): 7.4V nominal — standard touring car voltage
• Gray Edition: Clean, sleek gray casing
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 96 × 48 × 22.5 mm
• Weight: 195g per battery

Perfect For:

RC 1/10 touring car racing and bashing. Ideal for drivers who demand high-discharge performance, higher capacity, and a clean gray look on the track.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your touring car.

DXF 140C Graphene LiPo Battery Gray – 2S HV 7.6V 4800mAh NGP Plus Gold Version

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

140C High-Discharge Performance – 2S HV Gray NGP Plus Gold Version

Powered by advanced graphene technology, this 4800mAh 2S HV graphene LiPo delivers a blistering 140C discharge rate at 7.6V high voltage. The elevated HV cell voltage provides a measurable performance advantage over standard 7.4V packs — more speed, sharper throttle response, and greater power output. The NGP Plus form factor is purpose-built for 1/10 touring car chassis, with an ultra-slim profile that keeps your center of gravity low for optimal handling. Gold-plated terminals ensure maximum conductivity and minimal resistance under race conditions. The clean gray casing gives a sleek, understated look on the track.

NGP Plus Gold – Purpose-Built for Touring Car Racing

The NGP Plus design meets the dimensional requirements of major touring car racing classes. Precise dimensions ensure a perfect fit in standard NGP Plus-compatible chassis without modification — ready to race straight out of the box.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 140C Discharge Rate: Race-grade power delivery for competitive touring car racing
• 4800mAh Capacity: Higher capacity for extended run times
• 2S HV Configuration: 7.6V high-voltage nominal — performance advantage over standard 7.4V packs
• Gray Edition: Clean, sleek gray casing
• NGP Plus Gold Version: Ultra-low profile with gold-plated terminals for superior conductivity
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 96 × 47 × 19.5 mm
• Weight: 175g per battery

Perfect For:

RC 1/10 touring car racing. Ideal for drivers who want higher voltage performance, more capacity, NGP Plus chassis compatibility, and gold-plated terminal quality.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your touring car.

DXF 140C Graphene LiPo Battery Gray – 2S HV 7.6V 4800mAh

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

140C High-Discharge Performance – 2S HV Gray Edition

Powered by advanced graphene technology, this 4800mAh 2S HV graphene LiPo delivers a blistering 140C discharge rate at 7.6V high voltage. The elevated HV cell voltage provides a measurable performance advantage over standard 7.4V packs — more speed, sharper throttle response, and greater power output. The clean gray casing gives a sleek, understated look on the track. Advanced graphene cell technology ensures consistent power delivery, rapid heat dissipation, and exceptional cycle life.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 140C Discharge Rate: Race-grade power delivery for competitive touring car racing
• 4800mAh Capacity: Higher capacity for extended run times
• 2S HV Configuration: 7.6V high-voltage nominal — performance advantage over standard 7.4V packs
• Gray Edition: Clean, sleek gray casing
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 96 × 47 × 19.5 mm
• Weight: 175g per battery

Perfect For:

RC 1/10 touring car racing. Ideal for drivers who want higher voltage performance, more capacity, and a clean gray look on the track.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your touring car.

DXF 140C Graphene LiPo Battery Gold – 2S HV 7.6V 4400mAh NGP Plus Version

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

Competition-Grade 140C Performance – 2S HV Gold NGP Plus Version

Purpose-built for serious competitive racing, this 4400mAh 2S HV graphene LiPo delivers a blistering 140C discharge rate at 7.6V high voltage. The elevated HV cell voltage provides a measurable performance advantage over standard 7.4V packs — more speed, sharper throttle response, and greater power output from the first corner to the last. The NGP Plus form factor is precision-engineered for 1/10 touring car chassis, with an ultra-slim 18.5mm profile that keeps your center of gravity low for optimal handling. Gold-plated terminals ensure maximum conductivity and minimal resistance under race conditions.

NGP Plus – Built for Championship-Level Competition

The NGP Plus design meets the dimensional requirements of major touring car racing classes. The ultra-low profile and precise dimensions ensure a perfect fit in standard NGP-compatible chassis without modification — ready to race straight out of the box.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 140C Discharge Rate: Competition-grade power delivery for serious racing
• 4400mAh Capacity: Optimized capacity for full race run times
• 2S HV Configuration (2S1P): 7.6V high-voltage nominal — performance advantage over standard 7.4V packs
• Gold Edition: Premium gold-plated terminals for superior conductivity
• NGP Plus Version: Ultra-low profile design purpose-built for 1/10 touring car competition chassis
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 93 × 47 × 18.5 mm
• Weight: 159g per battery

Perfect For:

RC 1/10 touring car competition, including EFRA, IFMAR, and club-level racing. Designed for drivers who demand maximum performance, higher voltage output, and a perfect NGP Plus chassis fit for championship-level competition.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back qualifying sessions.

Select your quantity and connector type above to get the perfect setup for your touring car.

DXF 140C Graphene LiPo Battery Gray – 2S HV 7.6V 4400mAh

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

140C High-Discharge Performance – 2S HV Gray Edition

Powered by advanced graphene technology, this 4400mAh 2S HV graphene LiPo delivers a blistering 140C discharge rate at 7.6V high voltage. The elevated HV cell voltage provides a measurable performance advantage over standard 7.4V packs — more speed, sharper throttle response, and greater power output. The clean gray casing gives a sleek, understated look on the track. Advanced graphene cell technology ensures consistent power delivery, rapid heat dissipation, and exceptional cycle life.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 140C Discharge Rate: Race-grade power delivery for competitive touring car racing
• 4400mAh Capacity: Optimized capacity for full race run times
• 2S HV Configuration: 7.6V high-voltage nominal — performance advantage over standard 7.4V packs
• Gray Edition: Clean, sleek gray casing
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 93 × 47 × 18.5 mm
• Weight: 159g per battery

Perfect For:

RC 1/10 touring car racing. Ideal for drivers who want higher voltage performance and a clean gray look without the premium NGP form factor.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your touring car.

DXF 140C Graphene LiPo Battery Gold – 2S2P 7.4V 5200mAh NGP Version

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

140C Race-Grade Performance – 2S2P Gold NGP Version

Engineered for competitive 1/10 touring car racing, this 5200mAh 2S2P graphene LiPo delivers a blistering 140C discharge rate at 7.4V. The 2S2P configuration doubles the cell count for higher capacity and sustained current output compared to standard 2S packs. The NGP form factor is purpose-built for 1/10 touring car chassis with precise dimensions for a perfect fit. Gold-plated terminals ensure maximum conductivity and minimal resistance. Advanced graphene cell technology delivers consistent power, rapid heat dissipation, and exceptional cycle life.

2S2P Configuration – Double the Capacity

The 2S2P (2 series, 2 parallel) cell arrangement maintains the standard 7.4V voltage while doubling capacity to 5200mAh — giving you longer run times without changing your ESC settings or motor setup.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 140C Discharge Rate: Race-grade power delivery for competitive touring car racing
• 5200mAh Capacity: High capacity for extended run times
• 2S2P Configuration: 7.4V nominal, parallel cells for maximum capacity
• Gold Edition: Premium gold-plated terminals for superior conductivity
• NGP Version: Purpose-built form factor for 1/10 touring car chassis
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 96 × 48 × 25 mm
• Weight: 219g per battery

Perfect For:

RC 1/10 touring car racing. Ideal for drivers who need a compact, high-capacity pack with race-grade discharge rates and a perfect NGP chassis fit.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your touring car.

DXF 140C Graphene LiPo Battery Gray – 2S2P 7.4V 5200mAh

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

140C Race-Grade Performance – 2S2P Gray Edition

Engineered for competitive 1/10 touring car racing, this 5200mAh 2S2P graphene LiPo delivers a blistering 140C discharge rate at 7.4V. The 2S2P configuration doubles the cell count for higher capacity and sustained current output compared to standard 2S packs. The distinctive gray casing gives a clean, understated look on the track. Advanced graphene cell technology delivers consistent power, rapid heat dissipation, and exceptional cycle life.

2S2P Configuration – Double the Capacity

The 2S2P (2 series, 2 parallel) cell arrangement maintains the standard 7.4V voltage while doubling capacity to 5200mAh — giving you longer run times without changing your ESC settings or motor setup.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 140C Discharge Rate: Race-grade power delivery for competitive touring car racing
• 5200mAh Capacity: High capacity for extended run times
• 2S2P Configuration: 7.4V nominal, parallel cells for maximum capacity
• Gray Edition: Clean, understated gray casing
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 96 × 48 × 25 mm
• Weight: 219g per battery

Perfect For:

RC 1/10 touring car racing and bashing. Ideal for drivers who need a compact, high-capacity pack with race-grade discharge rates.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your touring car.

DXF 140C Graphene LiPo Battery Gray – 2S 7.4V 4400mAh

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

140C High-Discharge Performance – 2S Gray Edition

Powered by advanced graphene technology, this 4400mAh 2S graphene LiPo delivers a blistering 140C discharge rate at 7.4V. Designed for competitive 1/10 touring car racing, it delivers explosive power and consistent performance from the first lap to the last. The clean gray casing gives a sleek, understated look on the track. Advanced graphene cell technology ensures consistent power delivery, rapid heat dissipation, and exceptional cycle life.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 140C Discharge Rate: Race-grade power delivery for competitive touring car racing
• 4400mAh Capacity: Optimized capacity for full race run times
• 2S Configuration: 7.4V nominal — standard touring car voltage
• Gray Edition: Clean, sleek gray casing
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 93 × 48 × 18.5 mm
• Weight: 159g per battery

Perfect For:

RC 1/10 touring car racing and bashing. Ideal for drivers who demand high-discharge performance and consistent power output.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your touring car.

DXF 140C Graphene LiPo Battery Gray – 2S 7.4V 4400mAh NGP Plus Gold Version

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of 5mm Bullet, EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

140C High-Discharge Performance – 2S Gray NGP Plus Gold Version

Powered by advanced graphene technology, this 4400mAh 2S graphene LiPo delivers a blistering 140C discharge rate at 7.4V. The NGP Plus form factor is purpose-built for 1/10 touring car chassis, with an ultra-slim 18.5mm profile that keeps your center of gravity low for optimal handling and cornering performance. Gold-plated terminals ensure maximum conductivity and minimal resistance under race conditions. The clean gray casing gives a sleek, understated look on the track.

NGP Plus Gold – Purpose-Built for Touring Car Racing

The NGP Plus design meets the dimensional requirements of major touring car racing classes. Precise dimensions ensure a perfect fit in standard NGP Plus-compatible chassis without modification — ready to race straight out of the box.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: 5mm Bullet / EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / Q8s — fits virtually any RC vehicle
• 140C Discharge Rate: Race-grade power delivery for competitive touring car racing
• 4400mAh Capacity: Optimized capacity for full race run times
• 2S Configuration: 7.4V nominal — standard touring car voltage
• Gray Edition: Clean, sleek gray casing
• NGP Plus Gold Version: Ultra-low profile with gold-plated terminals for superior conductivity
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Dimensions: 93 × 48 × 18.5 mm
• Weight: 159g per battery

Perfect For:

RC 1/10 touring car racing. Ideal for drivers who demand high-discharge performance, a perfect NGP Plus chassis fit, gold-plated terminal quality, and a clean gray look on the track.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly between heats. Perfect for race day and back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your touring car.

The DXF 6S 22.8V 22000mAh 100C Soft Case LiPo Battery delivers extreme burst capability, high continuous output, and reliable capacity for compatible toy cars, toy boats, UAVs, multirotor drones, aircraft models, and custom RC projects. Engineered for high-drain performance and stable voltage under heavy throttle, this performance pack features durable 8AWG high-flex silicone wire and eight selectable connector types to plug directly into your system without adapters.

Watch DXF Batteries in Action

Key Features

• 100C high discharge rate: High burst and continuous discharge power for responsive throttle and high-power setups
• 22000mAh capacity: Solid balance between weight and run-time across ground, water, and aerial models
• 6S 22.8V standard platform: Reliable 6S LiPo power configuration (3.8V nominal per cell)
• Heavy-duty 8AWG silicone wire: Ultra-low resistance silicone wiring handles high amp flow efficiently
• Eight plug options: Available with XT60, EC5, TRX, Deans/T‑Plug, XT90, XT150, XT90S, or Q8S connectors
• Grade-A cells: Carefully matched internal resistance and capacity for consistent performance and cycle life

Specifications, Per Battery

• Brand: DXF POWER
• Series: DXF High-Discharge Series
• Capacity: 22000mAh
• Voltage: 22.8V nominal (6S, 3.8V per cell, 4.35V max charge per cell)
• Configuration: 6S
• Discharge Rate: 100C continuous
• Form Factor: Soft case
• Dimensions: Approximately 202 × 92 × 62mm
• Weight: Approximately 2450g
• Wire Gauge: 8AWG high-flex silicone wire
• Main Connector Options: XT60, EC5, TRX, Deans/T‑Plug, XT90, XT150, XT90S, and Q8S
• Applications: Compatible hobby-grade toy cars, toy boats, UAVs, large drones, FPV platforms, aircraft models, helicopters, multirotors, trucks, tanks, buggies, truggies, and custom RC projects

Package Includes

• DXF 6S 22.8V 22000mAh 100C LiPo battery with selected connector, quantity chosen from 1–6 packs
• Battery strap for each battery
• User manual and safety guide

Choose Your Ideal Power Bundle

• 1 Pack – Start Strong: One high-output battery for testing, replacement, or a single build
• 2 Pack – Double Your Runtime: Keep one battery ready while the other cools or charges
• 3 Pack – Stay in Rotation: Run, cool, and charge in sequence for uninterrupted sessions
• 4 Pack – Track & Field Ready: Ideal for race days, practice heats, and multi-vehicle setups
• 5 Pack – High-Output Set: Dependable power reserves for heavy schedules and extended field runs
• 6 Pack – Maximum Runtime & Value: Best value for competitive pilots, drivers, clubs, and multi-model fleets

More packs mean longer operating sessions, fewer downtime interruptions, and dependable backup capacity.

180-Day Warranty & Customer Support

Every DXF battery is backed by a 180-day manufacturer warranty against defects in materials and workmanship. DXF customer support is readily available for guidance on connector compatibility, charging parameters, and battery maintenance.

Usage & Safety Guidelines

• Use a dedicated balance charger supporting standard 6S LiPo balance charging mode.
• Always balance charge inside a fire-resistant LiPo safety bag and never leave charging batteries unattended.
• Do not overcharge past 4.20V per cell or discharge below 3.2V per cell.
• Store batteries at 3.80V–3.85V per cell in a cool, dry, ventilated location away from direct sunlight.
• Inspect the soft case, 8AWG silicone leads, and connectors for damage or puffing prior to every use.
• Never puncture, drop, crush, short-circuit, or expose the pack to extreme temperatures or water.
• Verify vehicle/drone battery bay dimensions, payload weight capacity, connector polarity, and ESC voltage limits before ordering.

Why Choose DXF?

• High-discharge 100C chemistry delivering explosive acceleration and stable voltage
• Premium Grade-A cell selection with matched IR and voltage balance
• Heavy-duty 8AWG silicone cabling for low resistance and high durability
• Eight connector choices for seamless plug-and-play compatibility
• Strict quality inspection and rigorous factory testing
• Professional customer service and global warehouse logistics

Perfect For

Engineered for compatible hobby-grade toy cars, 1/8 & 1/10 scale buggies, truggies, monster trucks, toy boats, high-speed UAVs, FPV multirotors, aircraft models, and custom RC builds requiring a 6S 22.8V 100C high-discharge soft-case pack.

Unleash maximum performance with DXF high-discharge power. Watch setups and performance tests on the DXF YouTube channel.

DXF 100C Graphene LiPo Battery Blue – 6S HV 22.8V 22000mAh Softcase

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

100C High-Discharge Performance – Blue Softcase High Voltage Edition

Powered by advanced graphene technology, this 22000mAh 6S HV Blue softcase battery delivers a powerful 100C discharge rate for explosive power delivery at 22.8V. Built with a 6S1P cell configuration, the HV chemistry provides higher nominal voltage per cell for increased speed and performance over standard LiPo packs. The distinctive blue casing makes it easy to identify on the track, while the softcase design keeps weight to a minimum for such a high-capacity pack.

Premium Softcase Construction

The softcase design keeps weight to a minimum while providing flexible protection for your cells — ideal for builds where maximum capacity and extended run time are the priority.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack) — great value for regular racers
• 8 Connector Options: EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / XT90S / Q8s — fits virtually any RC vehicle
• 100C Discharge Rate: High-power delivery for demanding RC applications
• 22000mAh Capacity: Ultra-high capacity for maximum run times and extended track sessions
• 6S HV Configuration (6S1P): 22.8V nominal high-voltage for increased speed and performance
• Blue Edition: Distinctive blue casing for easy identification on the track
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Softcase Design: Flexible and lightweight — ideal for high-capacity RC builds
• Dimensions: 202 × 92 × 62 mm
• Weight: 2450g per battery

Perfect For:

1/8 and 1/10 scale RC buggies, trucks, touring cars, off-road vehicles, and high-performance FPV racing drones. Ideal for endurance racing, long practice sessions, and any application demanding maximum capacity, higher voltage output, and sustained power.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly and keep racing without waiting for a recharge. Perfect for race day, team events, or back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your RC vehicle.

(CN)DXF 6S Lipo Battery 22.8V 100C 16000mAh Soft Case Battery  for Drone UAV FPV Car Truck Tank RC Buggy Truggy Racing Hobby

DXF 100C Graphene LiPo Battery Blue – 6S HV 22.8V 16000mAh Softcase

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

100C High-Discharge Performance – Blue Softcase High Voltage Edition

Powered by advanced graphene technology, this 16000mAh 6S HV Blue softcase battery delivers a powerful 100C discharge rate for explosive power delivery at 22.8V. Built with a 6S1P cell configuration, the HV chemistry provides higher nominal voltage per cell for increased speed and performance over standard LiPo packs. The distinctive blue casing makes it easy to identify on the track, while the softcase design keeps weight to a minimum.

Premium Softcase Construction

The softcase design keeps weight to a minimum while providing flexible protection for your cells — ideal for builds where maximum capacity and extended run time are the priority.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack) — great value for regular racers
• 8 Connector Options: EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / XT90S / Q8s — fits virtually any RC vehicle
• 100C Discharge Rate: High-power delivery for demanding RC applications
• 16000mAh Capacity: Massive capacity for maximum run times and extended track sessions
• 6S HV Configuration (6S1P): 22.8V nominal high-voltage for increased speed and performance
• Blue Edition: Distinctive blue casing for easy identification on the track
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Softcase Design: Flexible and lightweight — ideal for high-capacity RC builds
• Dimensions: 178 × 75 × 59 mm
• Weight: 1610g per battery

Perfect For:

1/8 and 1/10 scale RC buggies, trucks, touring cars, off-road vehicles, and high-performance FPV racing drones. Ideal for endurance racing, long practice sessions, and any application demanding maximum capacity, higher voltage output, and sustained power.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly and keep racing without waiting for a recharge. Perfect for race day, team events, or back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your RC vehicle.

The DXF 6S 22.8V 12000mAh 100C Soft Case LiPo Battery combines high-voltage energy chemistry with an ultra-high 100C discharge rate for high-performance toy cars, toy boats, UAVs, drones, aircraft models, and custom RC vehicles. Delivering higher initial voltage (22.8V nominal, up to 4.35V/cell HV charging) and lower internal resistance, this powerhouse pack features heavy-duty 8AWG high-flex silicone wire and eight selectable connector options to plug directly into your setup.

Watch DXF Batteries in Action

Key Features

• High-voltage 22.8V platform: 3.8V nominal per cell (4.35V max charge) delivers higher RPM and punchier power delivery
• 12000mAh high capacity: Provides extended operational sessions for aerial, surface, and marine applications
• 100C high discharge rate: Rapid power delivery and low voltage sag under heavy continuous throttle
• Heavy-duty 8AWG silicone wire: Upgraded ultra-thick, heat-resistant silicone wiring ensures lower resistance and efficient power transfer
• Eight plug options: Factory-installed XT60, EC5, TRX, Deans/T‑Plug, XT90, XT150, XT90S, or Q8S connectors
• Grade-A lithium cells: Precision matched for internal resistance, capacity, and voltage stability

Specifications, Per Battery

• Brand: DXF POWER
• Capacity: 12000mAh
• Voltage: 22.8V nominal (High Voltage LiHV platform)
• Configuration: 6S
• Discharge Rate: 100C continuous
• Form Factor: Soft case
• Dimensions: Approximately 185 × 75 × 49mm
• Weight: Approximately 1240g
• Wire Gauge: 8AWG high-flex silicone wire
• Main Connector Options: XT60, EC5, TRX, Deans/T‑Plug, XT90, XT150, XT90S, and Q8S
• Applications: Compatible hobby-grade toy cars, toy boats, UAVs, drones, FPV platforms, aircraft models, helicopters, multirotors, trucks, tanks, buggies, truggies, and custom RC projects

Package Includes

• DXF 6S 22.8V 12000mAh 100C battery with chosen connector, quantity selected from 1–6 packs
• Battery strap for each battery
• User manual and safety guide

Choose Your Ideal Power Bundle

• 1 Pack – Start Strong: Essential high-capacity pack for your primary model or replacement build
• 2 Pack – Double Your Runtime: Keep one pack running while the other cools or recharges
• 3 Pack – Continuous Rotation: Ideal for uninterrupted weekend flying or driving sessions
• 4 Pack – Mission Ready: Complete setup for multi-vehicle outings or commercial UAV operations
• 5 Pack – High-Output Fleet: Keep all your equipment powered throughout full-day events
• 6 Pack – Maximum Runtime & Value: Ultimate pack bundle for clubs, commercial operators, and multi-model enthusiasts

More packs mean more continuous runtime and less waiting by the charger.

180-Day Warranty & Customer Support

Every DXF battery is backed by a 180-day manufacturer warranty against defects in materials and workmanship. Our dedicated technical support team is available to assist with connector matching, battery maintenance, charging parameters, and application advice.

Usage & Safety Guidelines

• Use a dedicated balance charger that explicitly supports 6S LiPo / LiHV batteries.
• Always balance-charge in a fireproof LiPo safety bag and never leave charging batteries unattended.
• Do not exceed 4.35V per cell (LiHV mode) or 4.20V per cell (standard LiPo mode), and never discharge below 3.2V per cell.
• For storage, maintain at 3.80–3.85V per cell in a cool, dry place.
• Inspect the soft case, 8AWG lead wires, main connector, and balance lead before each use.
• Never puncture, disassemble, short-circuit, drop, or expose the pack to moisture or extreme heat.
• Verify your model's battery compartment dimensions, weight tolerance, ESC rating, motor requirements, and connector type before operation.

Why Choose DXF?

• Direct-from-factory Grade-A cell selection
• True-rated 12000mAh capacity and 100C high-voltage performance
• Upgraded heavy-duty 8AWG high-flex silicone wire
• Eight connector choices for seamless compatibility
• Strict testing for cell resistance, voltage, and cycle life
• Dedicated after-sales support and hobbyist service

Perfect For

Ideal for compatible hobby-grade toy cars, toy boats, UAVs, multirotor drones, aerial photography rigs, FPV setups, RC aircraft, heavy trucks, buggies, truggies, and custom robotics requiring a dependable high-voltage 6S 22.8V soft-case LiPo power source.

Power your adventure with DXF high-performance batteries. For product demonstrations, tests, and guides, visit the DXF YouTube channel.

DXF 100C Graphene LiPo Battery Blue – 6S HV 22.8V 12000mAh Softcase

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

100C High-Discharge Performance – Blue Softcase High Voltage Edition

Powered by advanced graphene technology, this 12000mAh 6S HV Blue softcase battery delivers a powerful 100C discharge rate for explosive power delivery at 22.8V. Built with a 6S1P cell configuration, the HV chemistry provides higher nominal voltage per cell for increased speed and performance over standard LiPo packs. The distinctive blue casing makes it easy to identify on the track, while the lightweight softcase design keeps weight to a minimum.

Premium Softcase Construction

The lightweight softcase design keeps weight to a minimum while providing flexible protection for your cells — ideal for weight-sensitive builds where every gram counts.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack) — great value for regular racers
• 8 Connector Options: EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / XT90S / Q8s — fits virtually any RC vehicle
• 100C Discharge Rate: High-power delivery for demanding RC applications
• 12000mAh Capacity: Extra-high capacity for maximum run times and extended track sessions
• 6S HV Configuration (6S1P): 22.8V nominal high-voltage for increased speed and performance
• Blue Edition: Distinctive blue casing for easy identification on the track
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Softcase Design: Lightweight and flexible — perfect for weight-sensitive RC builds
• Dimensions: 184 × 75 × 49 mm
• Weight: 1240g per battery

Perfect For:

1/8 and 1/10 scale RC buggies, trucks, touring cars, off-road vehicles, and high-performance FPV racing drones. Ideal for competitive racing and aggressive driving styles that demand maximum power, higher voltage output, and extended run times.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly and keep racing without waiting for a recharge. Perfect for race day, team events, or back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your RC vehicle.

DXF 140C Graphene LiPo Battery Gold – 6S HV 22.8V 9400mAh Softcase

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and race!

140C High-Discharge Performance – Gold Softcase High Voltage Edition

Powered by advanced graphene technology, this 9400mAh 6S HV Gold softcase battery delivers a powerful 140C discharge rate for explosive power delivery at 22.8V. Built with a 6S2P cell configuration for maximum capacity, the HV chemistry provides higher nominal voltage per cell for increased speed and performance over standard LiPo packs. Premium gold-plated connectors ensure maximum conductivity, while the lightweight softcase design keeps weight to a minimum.

Premium Softcase Construction

The lightweight softcase design keeps weight to a minimum while providing flexible protection for your cells — ideal for weight-sensitive builds where every gram counts.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack) — great value for regular racers
• 8 Connector Options: EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / XT90S / Q8s — fits virtually any RC vehicle
• 140C Discharge Rate: High-power delivery for demanding RC applications
• 9400mAh Capacity: High capacity for extended run times and more track time
• 6S HV Configuration (6S2P): 22.8V nominal high-voltage for increased speed and performance
• Gold Edition: Premium gold-plated terminals for superior conductivity and durability
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Softcase Design: Lightweight and flexible — perfect for weight-sensitive RC builds
• Dimensions: 135 × 45 × 71 mm
• Weight: 957g per battery

Perfect For:

1/8 and 1/10 scale RC buggies, trucks, touring cars, off-road vehicles, and high-performance FPV racing drones. Ideal for competitive racing and aggressive driving styles that demand maximum power and higher voltage output.

Why Choose the 2-Pack?

More batteries = More track time! The 2-pack combo lets you swap batteries instantly and keep racing without waiting for a recharge. Perfect for race day, team events, or back-to-back practice sessions.

Select your quantity and connector type above to get the perfect setup for your RC vehicle.

The DXF 6S 22.8V 9400mAh 100C Soft Case LiPo Battery delivers extreme burst capability, high continuous output, and reliable capacity for compatible toy cars, toy boats, UAVs, multirotor drones, aircraft models, and custom RC projects. Engineered for high-drain performance and stable voltage under heavy throttle, this performance pack features durable 10AWG high-flex silicone wire and eight selectable connector types to plug directly into your system without adapters.

Watch DXF Batteries in Action

Key Features

• 100C high discharge rate: High burst and continuous discharge power for responsive throttle and high-power setups
• 9400mAh capacity: Solid balance between weight and run-time across ground, water, and aerial models
• 6S 22.8V standard platform: Reliable 6S LiPo power configuration (3.8V nominal per cell)
• Heavy-duty 10AWG silicone wire: Ultra-low resistance silicone wiring handles high amp flow efficiently
• Eight plug options: Available with XT60, EC5, TRX, Deans/T‑Plug, XT90, XT150, XT90S, or Q8S connectors
• Grade-A cells: Carefully matched internal resistance and capacity for consistent performance and cycle life

Specifications, Per Battery

• Brand: DXF POWER
• Series: DXF High-Discharge Series
• Capacity: 9400mAh
• Voltage: 22.8V nominal (6S, 3.8V per cell, 4.35V max charge per cell)
• Configuration: 6S
• Discharge Rate: 100C continuous
• Form Factor: Soft case
• Dimensions: Approximately 135 × 45 × 66mm
• Weight: Approximately 788g
• Wire Gauge: 10AWG high-flex silicone wire
• Main Connector Options: XT60, EC5, TRX, Deans/T‑Plug, XT90, XT150, XT90S, and Q8S
• Applications: Compatible hobby-grade toy cars, toy boats, UAVs, large drones, FPV platforms, aircraft models, helicopters, multirotors, trucks, tanks, buggies, truggies, and custom RC projects

Package Includes

• DXF 6S 22.8V 9400mAh 100C LiPo battery with selected connector, quantity chosen from 1–6 packs
• Battery strap for each battery
• User manual and safety guide

Choose Your Ideal Power Bundle

• 1 Pack – Start Strong: One high-output battery for testing, replacement, or a single build
• 2 Pack – Double Your Runtime: Keep one battery ready while the other cools or charges
• 3 Pack – Stay in Rotation: Run, cool, and charge in sequence for uninterrupted sessions
• 4 Pack – Track & Field Ready: Ideal for race days, practice heats, and multi-vehicle setups
• 5 Pack – High-Output Set: Dependable power reserves for heavy schedules and extended field runs
• 6 Pack – Maximum Runtime & Value: Best value for competitive pilots, drivers, clubs, and multi-model fleets

More packs mean longer operating sessions, fewer downtime interruptions, and dependable backup capacity.

180-Day Warranty & Customer Support

Every DXF battery is backed by a 180-day manufacturer warranty against defects in materials and workmanship. DXF customer support is readily available for guidance on connector compatibility, charging parameters, and battery maintenance.

Usage & Safety Guidelines

• Use a dedicated balance charger supporting standard 6S LiPo balance charging mode.
• Always balance charge inside a fire-resistant LiPo safety bag and never leave charging batteries unattended.
• Do not overcharge past 4.20V per cell or discharge below 3.2V per cell.
• Store batteries at 3.80V–3.85V per cell in a cool, dry, ventilated location away from direct sunlight.
• Inspect the soft case, 10AWG silicone leads, and connectors for damage or puffing prior to every use.
• Never puncture, drop, crush, short-circuit, or expose the pack to extreme temperatures or water.
• Verify vehicle/drone battery bay dimensions, payload weight capacity, connector polarity, and ESC voltage limits before ordering.

Why Choose DXF?

• High-discharge 100C chemistry delivering explosive acceleration and stable voltage
• Premium Grade-A cell selection with matched IR and voltage balance
• Heavy-duty 10AWG silicone cabling for low resistance and high durability
• Eight connector choices for seamless plug-and-play compatibility
• Strict quality inspection and rigorous factory testing
• Professional customer service and global warehouse logistics

Perfect For

Engineered for compatible hobby-grade toy cars, 1/8 & 1/10 scale buggies, truggies, monster trucks, toy boats, high-speed UAVs, FPV multirotors, aircraft models, and custom RC builds requiring a 6S 22.8V 100C high-discharge soft-case pack.

Unleash maximum performance with DXF high-discharge power. Watch setups and performance tests on the DXF YouTube channel.

DXF 25C Graphene LiPo Battery Blue – 12S 44.4V 22000mAh Softcase

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose Your Pack Quantity & Connector: Available as a single battery or a 2-pack combo, with your choice of EC5, T, TRX, XT60, XT90, XT150, or Q8s connector — no adapters needed, just plug in and go!

25C High-Capacity Performance – Blue Softcase 12S Edition

Powered by advanced graphene technology, this 22000mAh 12S Blue softcase battery delivers a steady 25C discharge rate for sustained high-voltage power at 44.4V. Built with a 12S1P cell configuration, this pack is engineered for applications demanding high voltage and massive capacity — including large RC boats, heavy-lift drones, and UAV platforms. The distinctive blue casing makes it easy to identify, while the softcase design keeps weight to a minimum for such a high-capacity pack.

Premium Softcase Construction

The softcase design keeps weight to a minimum while providing flexible protection for your cells — ideal for builds where maximum capacity and extended run time are the priority.

Key Features:

• Pack Options: 1 battery (single) or 2 batteries (twin pack)
• 8 Connector Options: EC5 / T-Plug / TRX / XT60 / XT90 / XT150 / XT90S / Q8s — fits a wide range of high-power RC platforms
• 25C Discharge Rate: Steady power delivery for high-capacity applications
• 22000mAh Capacity: Ultra-high capacity for maximum run times and extended sessions
• 12S Configuration (12S1P): 44.4V nominal voltage for high-voltage RC platforms
• Blue Edition: Distinctive blue casing for easy identification
• Graphene Technology: Superior conductivity, lower internal resistance, and excellent thermal management
• Softcase Design: Flexible and lightweight — ideal for high-capacity builds
• Dimensions: 210 × 92 × 180 mm
• Weight: 5248g per battery

Perfect For:

Large RC boats, heavy-lift drones, UAV platforms, and other high-voltage RC applications requiring sustained power output and maximum capacity.

Why Choose the 2-Pack?

More batteries = More run time! The 2-pack combo lets you swap batteries instantly and keep going without waiting for a recharge. Perfect for extended sessions and demanding applications.

Select your quantity and connector type above to get the perfect setup for your RC platform.

The DXF 6S 22.2V 30000mAh 100C Soft Case LiPo Battery delivers extreme burst capability, high continuous output, and reliable capacity for compatible toy cars, toy boats, UAVs, multirotor drones, aircraft models, and custom RC projects. Engineered for high-drain performance and stable voltage under heavy throttle, this performance pack features durable 8AWG high-flex silicone wire and eight selectable connector types to plug directly into your system without adapters.

Watch DXF Batteries in Action

Key Features

• 100C high discharge rate: High burst and continuous discharge power for responsive throttle and high-power setups
• 30000mAh capacity: Solid balance between weight and run-time across ground, water, and aerial models
• 6S 22.2V standard platform: Reliable 6S LiPo power configuration (3.7V nominal per cell)
• Heavy-duty 8AWG silicone wire: Ultra-low resistance silicone wiring handles high amp flow efficiently
• Eight plug options: Available with XT60, EC5, TRX, Deans/T‑Plug, XT90, XT150, XT90S, or Q8S connectors
• Grade-A cells: Carefully matched internal resistance and capacity for consistent performance and cycle life

Specifications, Per Battery

• Brand: DXF POWER
• Series: DXF High-Discharge Series
• Capacity: 30000mAh
• Voltage: 22.2V nominal (6S, 3.7V per cell, 4.20V max charge per cell)
• Configuration: 6S
• Discharge Rate: 100C continuous
• Form Factor: Soft case
• Dimensions: Approximately 213 × 91 × 70mm
• Weight: Approximately 2960g
• Wire Gauge: 8AWG high-flex silicone wire
• Main Connector Options: XT60, EC5, TRX, Deans/T‑Plug, XT90, XT150, XT90S, and Q8S
• Applications: Compatible hobby-grade toy cars, toy boats, UAVs, large drones, FPV platforms, aircraft models, helicopters, multirotors, trucks, tanks, buggies, truggies, and custom RC projects

Package Includes

• DXF 6S 22.2V 30000mAh 100C LiPo battery with selected connector, quantity chosen from 1–6 packs
• Battery strap for each battery
• User manual and safety guide

Choose Your Ideal Power Bundle

• 1 Pack – Start Strong: One high-output battery for testing, replacement, or a single build
• 2 Pack – Double Your Runtime: Keep one battery ready while the other cools or charges
• 3 Pack – Stay in Rotation: Run, cool, and charge in sequence for uninterrupted sessions
• 4 Pack – Track & Field Ready: Ideal for race days, practice heats, and multi-vehicle setups
• 5 Pack – High-Output Set: Dependable power reserves for heavy schedules and extended field runs
• 6 Pack – Maximum Runtime & Value: Best value for competitive pilots, drivers, clubs, and multi-model fleets

More packs mean longer operating sessions, fewer downtime interruptions, and dependable backup capacity.

180-Day Warranty & Customer Support

Every DXF battery is backed by a 180-day manufacturer warranty against defects in materials and workmanship. DXF customer support is readily available for guidance on connector compatibility, charging parameters, and battery maintenance.

Usage & Safety Guidelines

• Use a dedicated balance charger supporting standard 6S LiPo balance charging mode.
• Always balance charge inside a fire-resistant LiPo safety bag and never leave charging batteries unattended.
• Do not overcharge past 4.20V per cell or discharge below 3.2V per cell.
• Store batteries at 3.80V–3.85V per cell in a cool, dry, ventilated location away from direct sunlight.
• Inspect the soft case, 8AWG silicone leads, and connectors for damage or puffing prior to every use.
• Never puncture, drop, crush, short-circuit, or expose the pack to extreme temperatures or water.
• Verify vehicle/drone battery bay dimensions, payload weight capacity, connector polarity, and ESC voltage limits before ordering.

Why Choose DXF?

• High-discharge 100C chemistry delivering explosive acceleration and stable voltage
• Premium Grade-A cell selection with matched IR and voltage balance
• Heavy-duty 8AWG silicone cabling for low resistance and high durability
• Eight connector choices for seamless plug-and-play compatibility
• Strict quality inspection and rigorous factory testing
• Professional customer service and global warehouse logistics

Perfect For

Engineered for compatible hobby-grade toy cars, 1/8 & 1/10 scale buggies, truggies, monster trucks, toy boats, high-speed UAVs, FPV multirotors, aircraft models, and custom RC builds requiring a 6S 22.2V 100C high-discharge soft-case pack.

Unleash maximum performance with DXF high-discharge power. Watch setups and performance tests on the DXF YouTube channel.