DXF 80C LiPo Battery – 6S HV 22.8V 520mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

Ultimate 6S HV 22.8V High-Punch Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding explosive throttle response at the highest voltage, this 520mAh 6S HV LiPo delivers an 80C discharge rate at 22.8V. At just 81g including wire and connector, the compact 65×17×36mm form factor fits a wide range of 6S HV micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate, delivering power when you need it most
• ⚡ Fast Charge Capable — supports up to 5C charge rate on compatible chargers, getting you back in the air faster
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology, protecting your investment over time
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee for peace of mind

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 22.8V HV / 6-Cell / 6S1P
• Discharge Rate: 80C
• Charge Rate: 1C Max (up to 5C fast charge capable)
• 520mAh Capacity: Optimized for 6S HV micro and whoop builds
• Dimensions: 65 × 17 × 36 mm
• Weight: 81g (including wire and connector)

Perfect For:

6S HV FPV whoop drones, micro racing quads, and high-performance indoor/outdoor FPV builds requiring explosive punch from a maximum-voltage 6S pack. Compatible with virtually any 6S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 6S HV whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 80C LiPo Battery – 5S HV 19.0V 520mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

High-Punch 5S HV 19.0V Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding explosive throttle response with high-voltage 5S performance, this 520mAh 5S HV LiPo delivers an 80C discharge rate at 19.0V. At just 67.5g including wire and connector, the compact 65×17×30mm form factor fits a wide range of 5S HV micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate, delivering power when you need it most
• ⚡ Fast Charge Capable — supports up to 5C charge rate on compatible chargers, getting you back in the air faster
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology, protecting your investment over time
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee for peace of mind

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 19.0V HV / 5-Cell / 5S1P
• Discharge Rate: 80C
• Charge Rate: 1C Max (up to 5C fast charge capable)
• 520mAh Capacity: Optimized for 5S HV micro and whoop builds
• Dimensions: 65 × 17 × 30 mm
• Weight: 67.5g (including wire and connector)

Perfect For:

5S HV FPV whoop drones, micro racing quads, and high-performance indoor/outdoor FPV builds requiring explosive punch from a high-voltage 5S pack. Compatible with virtually any 5S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 5S HV whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 80C LiPo Battery – 4S HV 15.2V 520mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

High-Punch 4S HV 15.2V Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding explosive throttle response with high-voltage 4S performance, this 520mAh 4S HV LiPo delivers an 80C discharge rate at 15.2V. At just 54g including wire and connector, the compact 65×17×24mm form factor fits a wide range of 4S HV micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate, delivering power when you need it most
• ⚡ Fast Charge Capable — supports up to 5C charge rate on compatible chargers, getting you back in the air faster
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology, protecting your investment over time
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee for peace of mind

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 15.2V HV / 4-Cell / 4S1P
• Discharge Rate: 80C
• Charge Rate: 1C Max (up to 5C fast charge capable)
• 520mAh Capacity: Optimized for 4S HV micro and whoop builds
• Dimensions: 65 × 17 × 24 mm
• Weight: 54g (including wire and connector)

Perfect For:

4S HV FPV whoop drones, micro racing quads, and high-performance indoor/outdoor FPV builds requiring explosive punch from a high-voltage 4S pack. Compatible with virtually any 4S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 4S HV whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 80C LiPo Battery – 3S HV 11.4V 520mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

High-Punch 3S HV 11.4V Power for FPV Whoop & Micro Racing

Engineered for FPV whoop and micro racing drones demanding explosive throttle response with high-voltage 3S performance, this 520mAh 3S HV LiPo delivers an 80C discharge rate at 11.4V. At just 40.5g including wire and connector, the compact 65×17×18mm form factor fits a wide range of 3S HV micro and whoop frames.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate, delivering power when you need it most
• ⚡ Fast Charge Capable — supports up to 5C charge rate on compatible chargers, getting you back in the air faster
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology, protecting your investment over time
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee for peace of mind

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 11.4V HV / 3-Cell / 3S1P
• Discharge Rate: 80C
• Charge Rate: 1C Max (up to 5C fast charge capable)
• 520mAh Capacity: Optimized for 3S HV micro and whoop builds
• Dimensions: 65 × 17 × 18 mm
• Weight: 40.5g (including wire and connector)

Perfect For:

3S HV FPV whoop drones, micro racing quads, and high-performance indoor/outdoor FPV builds requiring explosive punch from a high-voltage 3S pack. Compatible with virtually any 3S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 3S HV whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 80C LiPo Battery – 2S HV 7.6V 520mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

High-Punch 2S HV 7.6V Power for FPV Whoop & Micro Racing

Engineered for lightweight 2S FPV whoop, toothpick, and micro racing drones demanding maximum punch from a high-voltage dual-cell setup, this 520mAh 2S HV LiPo delivers an 80C discharge rate at 7.6V. At just 27g including wire and connector, the compact 65×17×12mm form factor is purpose-built for 2S micro and whoop frames where power-to-weight ratio is critical.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate
• ⚡ Fast Charge Capable — supports up to 5C charge rate on compatible chargers
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 7.6V HV / 2-Cell / 2S1P
• Discharge Rate: 80C
• Charge Rate: 1C Max
• 520mAh Capacity: Optimized for 2S micro, toothpick, and whoop builds
• Dimensions: 65 × 17 × 12 mm
• Weight: 27g (including wire and connector)

Perfect For:

2S HV FPV whoop drones, toothpick quads, ultra-light micro racing quads, and brushless micro FPV builds requiring maximum punch from a 2-cell high-voltage pack. Compatible with virtually any 2S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their 2S HV whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.

DXF 80C LiPo Battery – 1S HV 3.8V 520mAh | FPV Whoop & Micro Drone

🌍 Global Shipping from China – Rates & Delivery Times

https://dxf-hobby.store/pages/china-warehouse-shipping

Choose your pack quantity (4 PCS or 6 PCS) and connector type — no adapters needed, just plug in and fly!

Ultra-Lightweight 1S HV 3.8V High-Punch Power for FPV Whoop & Micro Racing

Engineered for the lightest FPV whoop and micro racing drones demanding maximum punch from a single high-voltage cell, this 520mAh 1S HV LiPo delivers an 80C discharge rate at 3.8V. At just 13.5g including wire and connector, the ultra-slim 65×17×6mm form factor is purpose-built for 1S micro and whoop frames where every gram counts.

Key Advantages:

• 🔬 Stable Automatic Stacking Technology — enables single-cell capacities for consistent performance across every pack
• ⚡ Higher Capacity Under Heavy Discharge — retains more than 90% capacity even at 100% C rate
• ⚡ Fast Charge Capable — supports up to 5C charge rate on compatible chargers
• 🔄 Longer Cycle Life — nearly double the cycle life of standard LiPo technology
• 🛡️ Friendly After-Sales Support — backed by DXF after-sales guarantee

Key Features:

• Pack Options: 4 PCS or 6 PCS
• 7 Connector Options: PH2.0 / JST / XT30 / SM / XT60 / EC5 / XT90
• Balance Connector: JST / XH
• Voltage: 3.8V HV / 1-Cell / 1S1P
• Discharge Rate: 80C
• Charge Rate: 1C Max
• 520mAh Capacity: Optimized for ultra-light 1S micro and whoop builds
• Dimensions: 65 × 17 × 6 mm
• Weight: 13.5g (including wire and connector)

Perfect For:

1S HV FPV whoop drones, ultra-light micro racing quads, and indoor FPV builds requiring maximum punch from a single high-voltage cell. Compatible with virtually any 1S micro build thanks to 7 connector options: PH2.0, JST, XT30, SM, XT60, EC5, XT90.

Why Choose 4 PCS?

• ✅ Always have a fresh pack ready — swap instantly between flights with zero downtime
• ✅ Ideal for practice sessions — 4 packs give you continuous flying without long waits for charging
• ✅ Better value than buying singles — stock up and save
• ✅ Perfect starter bundle for pilots building their first 1S HV whoop fleet

Why Choose 6 PCS?

• ✅ Maximum flight time — 6 packs means you fly more and wait less
• ✅ Best value per pack — the most cost-effective option for serious pilots
• ✅ Race day ready — enough packs to cover full qualifying and final rounds
• ✅ Rotate packs evenly to extend overall battery lifespan across your fleet

Select your quantity and connector type above to get the perfect setup for your FPV build.